I found out that it is possible to use the x32 rack as a digital snake for the full x32 console. This is only possible if you've upgraded to version 2.0 of the software which means no iPad control so I won't be using it this way until this is fixed but it's good to know. Here's a copy of the email they sent me.
The only real problem I have with this setup is that the S16 connectors are on the front, while the X32 Rack connectors are on the back. This will require a bit of work to make it look nice in the case....
A case with rear rack rails would probably work pretty well. Have the S16 facing "forward" on the front rails and the x32 Rack facing "backwards" on the rear rails so the connectors are all on the same side.
Page created in 0.198 seconds with 23 queries.