Hello all. I have one of these Cube Street amps for my Busking PA:http://www.musiciansfriend.com/amplifiers-effects/roland-cube-street-battery-powered-stereo-guitar-combo-amp I would like to put it on a speaker stand, but it doesn't have a pole mount. Is there an external pole mount available that I can screw onto this thingy? I can find the internal ones, but don't think there is enough clearance inside this little box to mount one. I hate to go to the trouble of fabricating something if there is one available.Thanks.Bob
Since you're talking about pole mounting it I'll assume the standard amp racks aren't high enough for your needs. The sloped back would make it difficult to mount it without having something integral to the box itself. Making a platform to secure it to and then attaching that to your pole would be your best bet, but keeping the amp from tipping would be an issue.We've used these on-stage adapters with good results for when we need to raise something without a pole mount. We attached a piece of 3/4" ply to it and then ratchet down whatever box we put on top. Not ideal, but works in a pinch and also makes a good impromptu projector stand.https://onstagestands.com/products/view/117555/5135
The problem with elevating such amps is that in doing so you de-couple them from the ground plane. You then lose a lot of the low and low-mid frequencies making for a thinner and somewhat harsh sound. I haven't really found a way to effectively compensate for the loss of tone and iI'm using essentially the same rig.If you're by a wall and not out in the wide open spaces you can use the wall as a reflector.
Busking with a battery powered amp doesn't usually include amp racks :-)
I know what you mean, but we're busking at festivals, fairs and in the street, and I'm running two vocal mics and my A/E guitar through the little thing. I need to get it up in the air to cover more area. Of course, Roland just came out with a 50 watt version with 8" speakers instead of 6.5"!!!
Bob...Please forgive me for going "old school" on you, but we played on the streets for years with acoustic guitar, banjo and two vocals...to crowds of several hundred people and a hefty ambient noise level.We used no amps whatsoever.It can be done. You could replace the A/E with a nice resonator if you need punch. Vocals just require voices accustomed to projecting without mics.Again, it can be done.
We've done it that way for many years as well. Lots of fun, and easy to cart around. We wanted to do more, though. We've got the Cube street for 2 vocal dynamics, and my A/E (and Telecaster); and a Taxi Limo with my wife's bass and our backing tracks ( I just upgraded the cheap Crate speaker with an Eminence 10). We've got a Rock & Roller cart to wheel the gear around on. Everything fits in the car. The sound is much better, and consequently, we make more money. Total wattage: 55.
Page created in 0.205 seconds with 23 queries.