I am having a conflict between Smaart 7 and QSC Signal Manager software. I am able to open Signal Manager and connect to a QSC DSP-4 with no problem. As soon as I open Smaart, the connection to the DSP drops out and gives a connection dropped error message.
Here is the set up.
PC laptop with Windows 7.
QSC DSP-4 connected via an USB to serial port adapter set to com 4 in the system.
Smaart 7 using an M-Audio Fast Track Pro USB as the interface.
A DBX measurement mic.
I'm using the DSP's stand alone, not with QSC amps.
Smaart operates normally no matter what, its just the DSP that loses communication. There are not a lot of available settings in the DSP other than which com port. I have tried a different port with no difference.
I have looked through the menus in Smaart and don't see any sort of port settings. So far a Google search hasn't turned up anything either.
I'm more a Mac guy than a PC guy so I'm really not sure what is causing the issue and was wondering if anyone here might have some ideas.
Thanks!
reference:
http://qsc.com/products/Digital_Signal_Processors/Dsp_Series/DSP-4/