ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: LS9: insert channel Aviom  (Read 684 times)

Tim Seifert

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
LS9: insert channel Aviom
« on: March 14, 2014, 02:09:50 am »

I have a lingering question that stems from my lack of understanding of the Yamaha diagram in the manual. When you are using Aviom card and send insert Channel to slot, is this pre-eq or do musicians hear the eq applied to the channel?

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1091
Re: LS9: insert channel Aviom
« Reply #1 on: March 14, 2014, 09:12:39 am »

You can't actually use an LS9 channel insert to send to a slot output - you'd use the channel direct output instead. You can choose one of several different pick-off points for the direct out, so it could be pre or post EQ depending on your needs.
Pages: [1]   Go Up

Page created in 0.048 seconds with 21 queries.