ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: LS9: insert channel Aviom  (Read 1257 times)

Tim Seifert

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
LS9: insert channel Aviom
« on: March 14, 2014, 02:09:50 AM »

I have a lingering question that stems from my lack of understanding of the Yamaha diagram in the manual. When you are using Aviom card and send insert Channel to slot, is this pre-eq or do musicians hear the eq applied to the channel?
Logged

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2253
Re: LS9: insert channel Aviom
« Reply #1 on: March 14, 2014, 09:12:39 AM »

You can't actually use an LS9 channel insert to send to a slot output - you'd use the channel direct output instead. You can choose one of several different pick-off points for the direct out, so it could be pre or post EQ depending on your needs.
Logged

ProSoundWeb Community

Re: LS9: insert channel Aviom
« Reply #1 on: March 14, 2014, 09:12:39 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.028 seconds with 24 queries.