Since canbus is pretty much a universal standard the EV amps work with any decent canbus-convertor. The tricky part is Irisnet, this piece of software doesn't recognize any other device than EV's own UCC1. But there's hope! The UCC1 is a rebadged device from Peak,
IPEH-002022.Get this convertor from ebay and plug it in to your computer. When windows asks for a driver, point to the one supplied within Irisnet. It's located in Programdata\EVI audio\Drivers\PEAKCAN. If you use this driver Irisnet will think it's a UCC1.
Next is the convertor for the convertor. EV uses RJ45 plugs, PeakCan has a DB9.
DB9 pinout:
1. NC or 5V DC( do not connect if 5V!)
2. Can Low
3. Can GND
4. NC
5. NC
6. Can High
7. Can GND
8. NC
9. NC or 5V DC( do not connect if 5V!)
EV RJ45 Pinout:
1. NC
2. Can GND
3. NC
4. Can High
5. Can Low
6. NC
7. Monitor + (not necessary for can)
8. Monitor - (not necessary for can)