ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: X32 and monitors  (Read 2409 times)

Gary Sjolin

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
X32 and monitors
« on: April 12, 2014, 08:31:13 AM »

Running 4 mixes from FOH. I'm new to the board.  Struggling to get monitor sends pre-EQ and Pre-fade. I'm getting pre-fade but post EQ

Thanks
Logged

Bill Schnake

  • Full Member
  • ***
  • Offline Offline
  • Posts: 141
    • Schnake Sound
Re: X32 and monitors
« Reply #1 on: April 12, 2014, 08:47:15 AM »

Running 4 mixes from FOH. I'm new to the board.  Struggling to get monitor sends pre-EQ and Pre-fade. I'm getting pre-fade but post EQ

Thanks
Gary, I am doing this without an X32 in front of me.  Try the following

Select Buss Master on the left side of the X32.  I think it's the 4th Button.
Push the 'Select' Button above Bus 1.
Push the 'Home' Button.
Go to the second tab 'Config' and select 'Post Fader'.

You need to do the above for each Bus you want to uses as monitors.

Hopefully, my memory is still good on how to do this.

Bill  ;)

Logged
Bill Schnake

217.670.1328    Office
217.553.2278    Cell
Schnake Sound, Inc

Experience, Expertise, Professionalism and Reliability

Bill Schnake

  • Full Member
  • ***
  • Offline Offline
  • Posts: 141
    • Schnake Sound
Re: X32 and monitors
« Reply #2 on: April 12, 2014, 08:48:47 AM »

Running 4 mixes from FOH. I'm new to the board.  Struggling to get monitor sends pre-EQ and Pre-fade. I'm getting pre-fade but post EQ

Thanks

Please change your name so that it reflects your real First Name and Last Name as required by the Forum Rules.

Thanks
Logged
Bill Schnake

217.670.1328    Office
217.553.2278    Cell
Schnake Sound, Inc

Experience, Expertise, Professionalism and Reliability

ProSoundWeb Community

Re: X32 and monitors
« Reply #2 on: April 12, 2014, 08:48:47 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.05 seconds with 20 queries.