ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: It has been a while since I posted, I hope you like this  (Read 1289 times)

Bill Burford

  • Newbie
  • *
  • Offline Offline
  • Posts: 23
It has been a while since I posted, I hope you like this
« on: February 17, 2014, 05:03:13 PM »

I found this sign next to this mixer in a rather large auditorium.   also it should be noted that each channel was assigned to each bus and main mix and each bus was assigned to main mix.  all faders were at +3.  no connectors were connected to aux outputs on back of board.  ( I ran my board into channel 9 since I "wrote down" all the settings so I could change them all back on channel 9 before I left )
« Last Edit: February 17, 2014, 05:09:04 PM by Bill Burford »
Logged
This forum helped me

ProSoundWeb Community

It has been a while since I posted, I hope you like this
« on: February 17, 2014, 05:03:13 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.035 seconds with 25 queries.