ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: SD10 Local AES Out SRC  (Read 2055 times)

Chris Trupe

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 61
SD10 Local AES Out SRC
« on: February 19, 2014, 09:07:04 PM »

Console is running at 96k, and the Tascam SS-CDR200 only operates at 48k.

Can you sample rate convert the AES outputs on the local outputs of the SD10?  I have a Tascam SS-CDR200, being fed from an XLR AES from the SD10 local AES out to the coaxial input on the CDR200.  It appears you can sample rate convert on the SD Rack AES outs, but not the local AES outs.  Is this correct?  It will sample rate convert the inputs so I can feed the CD player to the console, but can't record.

Or is this a total bust to record AES with these devices?

Logged

Jens Palm Bacher

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 319
    • Lydfabrikken
Re: SD10 Local AES Out SRC
« Reply #1 on: February 19, 2014, 09:32:28 PM »

Console is running at 96k, and the Tascam SS-CDR200 only operates at 48k.

Can you sample rate convert the AES outputs on the local outputs of the SD10?  I have a Tascam SS-CDR200, being fed from an XLR AES from the SD10 local AES out to the coaxial input on the CDR200.  It appears you can sample rate convert on the SD Rack AES outs, but not the local AES outs.  Is this correct?  It will sample rate convert the inputs so I can feed the CD player to the console, but can't record.

Or is this a total bust to record AES with these devices?
You are out of luck. You put a Behringer SRC2496 between to SRC if you relle need to.
Logged

ProSoundWeb Community

Re: SD10 Local AES Out SRC
« Reply #1 on: February 19, 2014, 09:32:28 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.046 seconds with 20 queries.