Hi All,
I have a TC M3K FX unit that I'm using with the X32. I think there was something I didn't do correctly so I need your help & expertise. Here's what I did:
- X32 Aux1 & 2 outputs to TCM3K's inputs
- Outputs from TCM3K to X32 Aux 1 & 2 inputs
- TC3MK set up to operate 2 engines separately (input 1 drives Engine 1 & 2 for Engine 2) & outputs both engine to Stereo. Engine 1 for vocals & 2 for drums
- On X32, I selected the Vocals group, navigated to Home --> Config & selected Aux 1 as insert point. For the drums group, insert is on Aux 2
- I also linked Aux & 2 so they work in stereo
That all worked. Here're my questions:
1. I don't think there's a way to insert per channel. Is this correct?
2. For some reasons, X32 doesn't remember this setting so I have to re-select the insert points every time I power-recycle the board. Saving & recalling scenes didn't help. I'm obviously missing a step here.
3. How do I change the send level from X32? I know I can change the input level coming from TCM3K on the Aux layer.
TIA for your help.
Vu