ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Audix ADX-51 XLR wireing  (Read 329 times)

Jean-Pierre Coetzee

  • Classic LAB
  • Full Member
  • *
  • Offline Offline
  • Posts: 148
  • Gauteng, South Africa
Audix ADX-51 XLR wireing
« on: January 29, 2014, 07:08:38 am »

Good day all,

I have an Audix ADX-51 that has had it's XLR connector removed, I would like to reconnect it but I cannot find out which colour corresponds to which pin. The three colours or the cables are blue, green and black.

If anyone is aware of the colours used in this mic and it would be greatly appreciated.

Thanking you
Logged
Audio Technician
Word & Life Church

Mark McFarlane

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1548
  • Middle East
    • Arkose Records
Re: Audix ADX-51 XLR wireing
« Reply #1 on: January 29, 2014, 09:28:45 am »

From the solder side:   

     3-green
1-blue    2-black

Blue is tied to the shell.
Their are some small caps between blue-green and blue-black.

Logged
Mark McFarlane
ARKOSERECORDS
Turn down what's too loud.

Jean-Pierre Coetzee

  • Classic LAB
  • Full Member
  • *
  • Offline Offline
  • Posts: 148
  • Gauteng, South Africa
Re: Audix ADX-51 XLR wireing
« Reply #2 on: January 29, 2014, 01:49:38 pm »

From the solder side:   

     3-green
1-blue    2-black

Blue is tied to the shell.
Their are some small caps between blue-green and blue-black.
Thanks man, the caps are still in place just the wires were disconnected, will sort this out when I get in tomorrow.
Logged
Audio Technician
Word & Life Church
Pages: [1]   Go Up
 


Page created in 0.115 seconds with 22 queries.