ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Audix ADX-51 XLR wireing  (Read 1688 times)

Jean-Pierre Coetzee

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 862
  • Gauteng, South Africa
Audix ADX-51 XLR wireing
« on: January 29, 2014, 07:08:38 AM »

Good day all,

I have an Audix ADX-51 that has had it's XLR connector removed, I would like to reconnect it but I cannot find out which colour corresponds to which pin. The three colours or the cables are blue, green and black.

If anyone is aware of the colours used in this mic and it would be greatly appreciated.

Thanking you
Logged
Audio Technician
Word & Life Church

"If you want "loud", then run a piece of sheet metal through a table saw------

If you want "watts"-then plug in a toaster"
- Ivan Beaver

Mark McFarlane

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1946
Re: Audix ADX-51 XLR wireing
« Reply #1 on: January 29, 2014, 09:28:45 AM »

From the solder side:   

     3-green
1-blue    2-black

Blue is tied to the shell.
Their are some small caps between blue-green and blue-black.

Logged
Mark McFarlane

Jean-Pierre Coetzee

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 862
  • Gauteng, South Africa
Re: Audix ADX-51 XLR wireing
« Reply #2 on: January 29, 2014, 01:49:38 PM »

From the solder side:   

     3-green
1-blue    2-black

Blue is tied to the shell.
Their are some small caps between blue-green and blue-black.
Thanks man, the caps are still in place just the wires were disconnected, will sort this out when I get in tomorrow.
Logged
Audio Technician
Word & Life Church

"If you want "loud", then run a piece of sheet metal through a table saw------

If you want "watts"-then plug in a toaster"
- Ivan Beaver

ProSoundWeb Community

Re: Audix ADX-51 XLR wireing
« Reply #2 on: January 29, 2014, 01:49:38 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.021 seconds with 24 queries.