ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Confusing Isolation Transformer Traces  (Read 6722 times)

Simon Byrne

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Re: Confusing Isolation Transformer Traces
« Reply #10 on: April 06, 2014, 11:20:52 PM »

Mike,

I think you nailed it in your first post when you commented on the source impedance design of the Directors. That is, they are designed to take much, much higher impedance sources.

Unfortunately I cannot find specifications, let alone a schematic for the Directors, but I am guessing you have inadvertently created a gentle high pass filter with the Allen Avionics AGL-600/Director combination. Both devices are are inductive and the source impedance to the Director is massively different to what it is designed for. It makes sense that a inductive/resistive response could change over frequency.

Regards,

Simon.
Logged

ProSoundWeb Community

Re: Confusing Isolation Transformer Traces
« Reply #10 on: April 06, 2014, 11:20:52 PM »


Pages: 1 [2]  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.033 seconds with 23 queries.