ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2] 3  All   Go Down

Author Topic: Scaffolding vs. crank up lifts  (Read 16461 times)

Bradford "BJ" James

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 446
Re: Scaffolding vs. crank up lifts
« Reply #10 on: December 27, 2013, 11:24:12 PM »

Where is this T bar and yoke you speak of? I couldn't find it on Applied website.
Bottom of p.40 of their catalogue.
Cheers,
BJ
Logged
Proud Canadian dealer for Danley Sound Labs, A&H, Yamaha, QSC, Yorkville and more.

Jamin Lynch

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1999
  • Corpus Christi, TX.
Re: Scaffolding vs. crank up lifts
« Reply #11 on: December 28, 2013, 08:46:52 AM »

Applied makes a "T" bar with a hanging yoke on it for their L16 lifts. you can hang a speaker on each side and aim them appropriately. The bar is rated for the same weight as the lift, so 500#. You can only hang two speakers from each lift (unless you are hanging speakers under one another), so it has its limitations, but I find that it works really well and couldn't be easier to deploy. Because the "T" only lowers to about 6' off the ground, I stand each speaker on an "On-Stage" WS540s stand (one on each side to maintain balance) to hook it to the hanging bar,  so I don't have to hold it there while I'm trying to connect the  shackles, thus making it a one man job.

Do you have some pictures of this set up you could share with us? Would like to see how it looks if ya don't mind.
Logged

Ryan Grandusky

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 75
Re: Scaffolding vs. crank up lifts
« Reply #12 on: December 28, 2013, 01:20:58 PM »

Do you have some pictures of this set up you could share with us? Would like to see how it looks if ya don't mind.

It's not a real world use picture but for a picture of the product check the bottom left corner of the Applied Lift Accessories Cut Sheet: Hanging Style - Item No. 1-00-018

http://www.appliednn.com/pdfs/L16M_and_Accessories.pdf
Logged
Ryan "Squirrel" Grandusky
Sound Provider in Central Texas.
Speakers: RCF HDL6a, NX-L44a, 8006-AS, EV XLD281, QRX153, QRX115, ZX1, SB122, XSUBS, JBL PRX835w, SRX828SP, Yorkville LS2100P, EAW SM200, Macpherson M12P, Yamaha A12M.
Consoles: Digico SD12, SD11, Soundcraft Si Perf 1, Exp 3, Comp 24, Midas M32, Presonus SL 32SX, SL 16r, Mackie DL1608

Jamin Lynch

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1999
  • Corpus Christi, TX.
Re: Scaffolding vs. crank up lifts
« Reply #13 on: December 28, 2013, 01:45:47 PM »

It's not a real world use picture but for a picture of the product check the bottom left corner of the Applied Lift Accessories Cut Sheet: Hanging Style - Item No. 1-00-018

http://www.appliednn.com/pdfs/L16M_and_Accessories.pdf

Thanks. I finally found that. Pics of real world set up would be nice to see.

I wish somebody made a similar crank up lift and T bar/yoke assembly that lowered all the way down to speaker height so you don't have to lift them up just to hang from the T bar.
Logged

Ted Christensen

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 426
Re: Scaffolding vs. crank up lifts
« Reply #14 on: December 28, 2013, 01:47:35 PM »

It's not a real world use picture but for a picture of the product check the bottom left corner of the Applied Lift Accessories Cut Sheet: Hanging Style - Item No. 1-00-018

http://www.appliednn.com/pdfs/L16M_and_Accessories.pdf

Why so much space between the speakers?  What if you needed to tight pack them or add a down angle?
Logged
Danley SH46 / Th115 / EV ZX5 / EV QRX212H / QSC HPR / Lab Gruppen / Chauvet / Blizzard / Allen and heath ilive

g'bye, Dick Rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7424
  • Duluth
Re: Scaffolding vs. crank up lifts
« Reply #15 on: December 28, 2013, 02:01:34 PM »


Who is using what and why?

I use scaffold:

1.  Cheaper.

2.  More stable in most applications.  Easier to level.

3.  No tripping hazard from legs/outriggers.

4.  Easy to tarp the speakers for weather changes.

5.  I can't use crank-up lifts when I need to repair the gutters on the house or do any painting.  I can also use the scaffold with the wheels for working on installations.
Logged
Pay no attention to the man behind the curtain...

Mike Pyle

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1219
  • Santa Rosa, CA
Re: Scaffolding vs. crank up lifts
« Reply #16 on: December 28, 2013, 02:09:27 PM »

Years ago I did a gig in a small arena where I used U215s for mains and U15s for outfill to hit the side seating. This is the rigging I used. Note that except for the pullback straps the rigging is all steel. The T-Bar is the standard Applied truss adapter with adjustable width expanders made from heavy steel box tubing added.


Logged
Mike Pyle  Audiopyle Sound  707-315-6204
Dealer For: JBL, Soundcraft, Crown, dbx, AKG, Yorkville, EV, QSC, RCF, FBT, Danley Sound Labs, Meyer Sound, Fulcrum Acoustic, Tannoy, Lab Gruppen, Powersoft, Linea Research, EAW, Allen & Heath, Ashly, APB, Audix, One Systems, Presonus, K&M, Ultimate, Global Truss, Intellistage, SKB, Gator, Radial Engineering, Turbosound, Midas, dB Technologies, American DJ, Odyssey, ProCo, Rapco, CBI, Elation, Mipro, Chauvet, Blizzard, Shure, Whirlwind, Bassboss, Yamaha, Line 6, Behringer, On-Stage, more...

Tomm Williams

  • Full Member
  • ***
  • Offline Offline
  • Posts: 204
Re: Scaffolding vs. crank up lifts
« Reply #17 on: December 28, 2013, 03:28:46 PM »

Years ago I did a gig in a small arena where I used U215s for mains and U15s for outfill to hit the side seating. This is the rigging I used. Note that except for the pullback straps the rigging is all steel. The T-Bar is the standard Applied truss adapter with adjustable width expanders made from heavy steel box tubing added.



Mike did you make (or have made) that lift?
Logged

Tomm Williams

  • Full Member
  • ***
  • Offline Offline
  • Posts: 204
Re: Scaffolding vs. crank up lifts
« Reply #18 on: December 28, 2013, 03:29:46 PM »

I use scaffold:

1.  Cheaper.

2.  More stable in most applications.  Easier to level.

3.  No tripping hazard from legs/outriggers.

4.  Easy to tarp the speakers for weather changes.

5.  I can't use crank-up lifts when I need to repair the gutters on the house or do any painting.  I can also use the scaffold with the wheels for working on installations.

Dick do you happen to have any photos of your set up at an event?
Logged

g'bye, Dick Rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7424
  • Duluth
Re: Scaffolding vs. crank up lifts
« Reply #19 on: December 28, 2013, 03:50:15 PM »

Dick do you happen to have any photos of your set up at an event?

Sorry, no.  I'm too busy working to take photos.  I take a camera with me, but always forget it in the van. 

Logged
Pay no attention to the man behind the curtain...

ProSoundWeb Community

Re: Scaffolding vs. crank up lifts
« Reply #19 on: December 28, 2013, 03:50:15 PM »


Pages: 1 [2] 3  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.033 seconds with 24 queries.