ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: LS9 stereo master fader/channel PEQ unlink?  (Read 1954 times)

jim whitmer

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 90
LS9 stereo master fader/channel PEQ unlink?
« on: December 24, 2013, 11:35:46 AM »
LS9 Master fader operates both L/R Omni's when moved which is fine. However is it possible to have the PEQ's not link together? Poked around on the console and digging through the manual now, but nothing is jumping out at me.

Thanks and Happy Festivus!
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7577
  • Audio Plumber
Re: LS9 stereo master fader/channel PEQ unlink?
« Reply #1 on: December 24, 2013, 11:48:39 AM »
Quote from: jim whitmer on December 24, 2013, 11:35:46 AM
LS9 Master fader operates both L/R Omni's when moved which is fine. However is it possible to have the PEQ's not link together? Poked around on the console and digging through the manual now, but nothing is jumping out at me.

No, you cannot break that stereo pair. If you need individual control of L&R channel parameters use a couple of matrix outputs.

Mac
Logged

jim whitmer

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 90
Re: LS9 stereo master fader/channel PEQ unlink?
« Reply #2 on: December 24, 2013, 01:52:29 PM »
Thanks. Will do.
Logged

ProSoundWeb Community

Re: LS9 stereo master fader/channel PEQ unlink?
« Reply #2 on: December 24, 2013, 01:52:29 PM »

Pages: [1]   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.03 seconds with 24 queries.