Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Console Connectivity Solutions

Behringer X32

(1/8) > >>

Doug Fowler:
X32 connectivity solutions here.

James A. Griffin:
X32 > 225 ft Belden Data Tuff w/ ethercon > S16 # 1 > 50 ft Belden Data Tuff w/ ethercon > S16 # 2

http://www.markertek.com/Cables/Computer-Data-Cables/CAT-5-Cables/TecNec/CAT5XTRM-10.xhtml?utm_medium=shoppingengine&utm_source=googlebase&cvsfa=3786&cvsfe=2&cvsfhu=434154355854524d2d3230&gclid=CNzHusLwnbkCFUhk7AodX0AAOQ

While I was waiting for the DataTuff cable to be shipped, I bought a 100' spool of Cat5 off the shelf at Home Depot.    I had no issue with it and have had none with the Belden.

Tim McCulloch:

--- Quote from: James A. Griffin on August 27, 2013, 10:54:55 am ---X32 > 225 ft Belden Data Tuff w/ ethercon > S16 # 1 > 50 ft Belden Data Tuff w/ ethercon > S16 # 2

http://www.markertek.com/Cables/Computer-Data-Cables/CAT-5-Cables/TecNec/CAT5XTRM-10.xhtml

While I was waiting for the DataTuff cable to be shipped, I bought a 100' spool of Cat5 off the shelf at Home Depot.    I had no issue with it and have had none with the Belden.

--- End quote ---

I have a 100' piece of generic CAT5e UTP on our cross-stage drive loom and used it to connect an X32 to S16.  Coiled up, with the ends freed enough to do the patch, we encountered no problems in shop tests.  I need to see if there is 250' - 300' left in a box and try it out.

The Markertec product looks interesting.  Behringer says "shielded" but so far having no luck with "stock" assemblies of STP/Ethercon.

John Moore:
http://www.ebay.com/itm/130892764848

Works well , rugged... keep away from DMX cables paralleling the CAT5 cable...

Michael Storey:

--- Quote from: John Moore on September 06, 2013, 10:54:44 am ---http://www.ebay.com/itm/130892764848

Works well , rugged... keep away from DMX cables paralleling the CAT5 cable...

--- End quote ---

How much of an issue is this in your experience? I assume the same goes for paralleling AES/EBU audio with CAT5?

Navigation

[0] Message Index

[#] Next page

Go to full version