ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: IT4000 appearing as an IT8000 in System Architect 3.3  (Read 1289 times)

Mike Diack

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 375
  • Auckland, New Zealand.
IT4000 appearing as an IT8000 in System Architect 3.3
« on: June 27, 2013, 06:29:57 AM »

SA thinks the 4k is an 8k.
Amp works fine.
Any idea why that would be?
M
Logged

Nicolas Poisson

  • Full Member
  • ***
  • Offline Offline
  • Posts: 147
  • Paris, France
Re: IT4000 appearing as an IT8000 in System Architect 3.3
« Reply #1 on: June 27, 2013, 07:32:03 AM »

SA thinks the 4k is an 8k.

Wow! You have just gained the double of the power for free!



Sorry, no other clue.
Logged

Kevin gring

  • Newbie
  • *
  • Offline Offline
  • Posts: 23
  • Free at last
Re: IT4000 appearing as an IT8000 in System Architect 3.3
« Reply #2 on: June 27, 2013, 07:54:56 AM »

SA thinks the 4k is an 8k.
Amp works fine.
Any idea why that would be?
M
Someone had to have switched the processor card from an IT8000. If the model number is wrong, your gain, fan operation and limiting will be off.
Logged
Kevin B Gring
Sr Technical Support Specialist at LEA Professional

ProSoundWeb Community

Re: IT4000 appearing as an IT8000 in System Architect 3.3
« Reply #2 on: June 27, 2013, 07:54:56 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.035 seconds with 25 queries.