ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 ... 32 33 [34]   Go Down

Author Topic: behringer x32 cracking and popping with 2x S16 connected?  (Read 37987 times)

Tim Weaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 957
  • College Station, Texas
    • Weaver Imaging
Re: behringer x32 cracking and popping with 2x S16 connected?
« Reply #330 on: June 10, 2014, 07:38:18 pm »

OK, thanks for that clarification.

Was the entire signal lost or just the vocal? Like I said, it sounded like maybe just the vocal, but I couldn't tell.

Have you checked to see that your Ethercons are actually shorted together by the shield? That's where I'd start.

Please keep us informed.

Thanks,
Dan

The entire signal was lost momentarily.

Can't check the continuity right now because the snake is 150 miles away from me unfortunately.


What is the proplex product that is recommended? PCCAT5EP or the "Ultra Patch" PCCAT5EUTPP.

I swear I read everything there was to read about these things and the consensus was, "use sheided cable with ethercon and you'll be fine"..... ::)
Logged
I'm not the sharpest loaf of bread in the elevator.

Mike Pyle

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 351
  • Santa Rosa, CA
Re: behringer x32 cracking and popping with 2x S16 connected?
« Reply #331 on: June 11, 2014, 01:00:18 pm »

What is the proplex product that is recommended? PCCAT5EP or the "Ultra Patch" PCCAT5EUTPP.

PCCAT5EP
Logged
Mike Pyle  Audiopyle Sound  707-315-6204
Dealer For: Yorkville, EV, QSC, RCF, FBT, SLS, Renkus Heinz, Danley Sound Labs, Tannoy, Lab Gruppen, Powersoft, VTC, EAW, Allen & Heath, Ashly, APB, Denon, Rane, Audix, One Systems, OnPoint Audio, Beyerdynamic, Presonus, K&M, Ultimate, Global Truss, Road Ready, SKB, Gator, Radial Engineering, Turbosound, dB Technologies, American DJ, Odyssey, ProCo, Rapco, CBI, Elation, Mipro, Chauvet, Blizzard, Shure, Whirlwind, BenQ, Yamaha, Line 6, more...

Mike Pyle

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 351
  • Santa Rosa, CA
Re: behringer x32 cracking and popping with 2x S16 connected?
« Reply #332 on: June 13, 2014, 12:53:19 pm »

Can't check the continuity right now because the snake is 150 miles away from me unfortunately.

I would like to know what brand & type cable it was.
« Last Edit: June 13, 2014, 03:54:20 pm by Mike Pyle »
Logged
Mike Pyle  Audiopyle Sound  707-315-6204
Dealer For: Yorkville, EV, QSC, RCF, FBT, SLS, Renkus Heinz, Danley Sound Labs, Tannoy, Lab Gruppen, Powersoft, VTC, EAW, Allen & Heath, Ashly, APB, Denon, Rane, Audix, One Systems, OnPoint Audio, Beyerdynamic, Presonus, K&M, Ultimate, Global Truss, Road Ready, SKB, Gator, Radial Engineering, Turbosound, dB Technologies, American DJ, Odyssey, ProCo, Rapco, CBI, Elation, Mipro, Chauvet, Blizzard, Shure, Whirlwind, BenQ, Yamaha, Line 6, more...

Bob Leonard

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4116
  • Boston, MA USA
Re: behringer x32 cracking and popping with 2x S16 connected?
« Reply #333 on: June 13, 2014, 03:19:44 pm »

Has anyone tried category 7 cable yet?
Logged
BOSTON STRONG........

Now touring nursing homes in a neighborhood near you..
Pages: 1 ... 32 33 [34]   Go Up
 


Page created in 0.078 seconds with 23 queries.