ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Sennheiser Wireless Cable Build  (Read 3291 times)

Darrel Harris

  • Newbie
  • *
  • Offline Offline
  • Posts: 31
Sennheiser Wireless Cable Build
« on: February 27, 2013, 07:05:31 PM »

I need to build a couple of guitar cords for my Sennheiser G3 Packs. Does anyone have a wiring plan to go from an E-Connector to a 1/4" Male?

Thanks!
Logged

Jim Roach

  • Newbie
  • *
  • Offline Offline
  • Posts: 31
Re: Sennheiser Wireless Cable Build
« Reply #1 on: February 27, 2013, 09:32:39 PM »

I need to build a couple of guitar cords for my Sennheiser G3 Packs. Does anyone have a wiring plan to go from an E-Connector to a 1/4" Male?

Thanks!

I assume the "E-Connector" you are referring to is the 3.5mm input on the belt pack? Either way, tip is mic level in with bias, ring is instrument level in and sleeve is common for both.

You would wire tip on the 1/4" to ring on the 3.5mm and sleeve to sleeve.

Logged

ProSoundWeb Community

Re: Sennheiser Wireless Cable Build
« Reply #1 on: February 27, 2013, 09:32:39 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.041 seconds with 25 queries.