ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: Add another sub?  (Read 7551 times)

David Morison

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 821
  • Aberdeen, Scotland
Re: Re: Add another sub?
« Reply #20 on: March 01, 2013, 07:18:15 AM »

It seems to me the band between 100 and 200 hz is usually the most out of wack on these systems.

In addition to time alignment errors, that's also going to be the range that shows up any mud if subs are turned up louder than mains without appropriate compensation for the increased overlap (ie underlapping the crossover points).
(I'm sure you and Art know that of course, just chucking it out for anyone else, FWIW.)
David.
Logged

Greg Percy

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 60
Re: Add another sub?
« Reply #21 on: April 02, 2013, 06:27:02 PM »

OK- i stumbled across 2 more UCS1s (now I have 4) for $400 each...
More subs=good
Will be running with (2) plx1602 bridged at 4ohms --2 ucs1 per side 4ohms should be about 800 watts per cab...also coupling effect of 2 per side should help...shouldn't have to push it too much with music I deal with...selling the hpr151 to help pay for other 2 subs

Good solution?
Thx

GP

Logged

ProSoundWeb Community

Re: Add another sub?
« Reply #21 on: April 02, 2013, 06:27:02 PM »


Pages: 1 2 [3]  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.037 seconds with 24 queries.