Ok, I just updated to the new 1.1 firmare for the Allen and Heath GLD-80 digital mixer for our church and I didn't realize I had to backup my scenes. Everything is gone! So unless there is something I don't know I have to start from scratch. We used the old settings from our old board to use as a template for the GLD-80. However, I can't seem to find those. It had the settings for the 31 band EQ and all the EQ settings for all the channels. I have never had to start from scratch before (as the person who setup our first board is no longer here or able to help us) so any help would be appreciated. This mixer is for a church and the room dimensions are 24 feet wide and 65 feet long with paneling walls on the sides and polyurethane resin brick on the platform where the mics and instruments are.. I am really scared about tackling the 31 band EQ and don't know how to "tune the room". Also would like advice for EQ on lapel mics. Please help someone!
Jordan,
Perhaps someone knows of an undo, but I don't.
Missing from your description of the space are the height, composition of every wall, all architectural details, the 3d position and types of speakers, amps, processors, the position of every physical object in the space, microphones, instruments, etc...
Sorry to say that no one will be able to give you a list of settings to fix this remotely. What you need is someone who does know how to tune the setup. I'm sure there are some capable folks on this forum. Where did you say you are located?