ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: repairing 2-piece chassis male XLR  (Read 5852 times)

Thomas Bishop

  • Full Member
  • ***
  • Offline Offline
  • Posts: 120
Re: repairing 2-piece chassis male XLR
« Reply #10 on: March 16, 2013, 09:53:29 PM »
If you were in the States I would recommend going to any Ace Hardware or similar and buying the basic manual rivet gun.  It can't get any more self explanatory.  I prefer to rivet chassis mount connectors whenever possible, but I also have a couple of panels that have held up for years with nuts/bolts/star washers.
Logged

frank kayser

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1658
  • Maryland suburbs of Washington DC
Re: repairing 2-piece chassis male XLR
« Reply #11 on: March 18, 2013, 11:49:14 PM »
Timely post - just had the same trouble on mine.  Thanks for the solutions, too.
Logged

Tim Padrick

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 927
  • Indianapolis
    • T.P. Audio
Re: repairing 2-piece chassis male XLR
« Reply #12 on: March 25, 2013, 02:40:08 AM »
Just superglue it for now.

As Mr. Mackey might say: "Rivets are bad - don't use rivets umkay".  Use 4-40 machine screws.  I get 'em from McMaster.com.
Logged

ProSoundWeb Community

Re: repairing 2-piece chassis male XLR
« Reply #12 on: March 25, 2013, 02:40:08 AM »

Pages: 1 [2]  All   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.037 seconds with 25 queries.