Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Tim Perry]

So i was going to do lights for a band and ended up making their PA work.. but couldn't find the global phantom power switch. 

Checking the manual and spec sheet I see it shown in the block diagram but no mention of it elsewhere.

I was pretty bewildered because the unit has special jack for a RTA mic.

[g'bye, Dick Rees]

So i was going to do lights for a band and ended up making their PA work.. but couldn't find the global phantom power switch. 

Checking the manual and spec sheet I see it shown in the block diagram but no mention of it elsewhere.

I was pretty bewildered because the unit has special jack for a RTA mic.

It appears to be one of those recessed switches like the old MixWiz had.  There's a label right at the base of the Master section LED's.

[John Luty]

So i was going to do lights for a band and ended up making their PA work.. but couldn't find the global phantom power switch. 

Checking the manual and spec sheet I see it shown in the block diagram but no mention of it elsewhere.

I was pretty bewildered because the unit has special jack for a RTA mic.

I just checked the manual it is right below the right LED meter and above the fader

[Bob Leonard]

Shame on Peavey for putting it in the manual. Who looks there???

[Tim Perry]

Shame on Peavey for putting it in the manual. Who looks there???

The show was a second floor job. Stairs only.  I was fried before the show started. Ran 2 light boards, sound, and video record alone.  One day notice on the show so no prep time.
Great R&B music though.

An audix D1 on HH and D2 on ride did just fine. 
 

 

[ProSoundWeb Community]