ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 ... 3 4 [5]   Go Down

Author Topic: JTR Noesis 3TX FOH PA Speaker  (Read 45018 times)

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9534
  • Atlanta GA
Re: JTR Noesis 3TX FOH PA Speaker
« Reply #40 on: April 18, 2014, 08:18:54 AM »



For the record, I own a 3-dozen EAW line array boxes, a bunch of SLS line columns, four each of your (or Tom's) GH-60 and SH46.  I have an understanding of how a line array versus point source works.  But I do not know how to classify the GH60. 

JR
The GH 60 has a pattern unlike anything that I am aware of.  Because of the amplitude shading the energy is much louder in the "hot" part of the horn-which is NOT facing straight forward-but rather 20° down-than the lower part of the pattern.

This does not work for every application-but in certain situations (like at lambeau field-Greenbay packers) it IS what makes that system work very well.

Loudspeakers are simply tools-and the same tools is not right for every application and different applications need different tools.

That is the reason I always say you have to "define the target" THEN figure out what is the proper tool for the job.
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

ProSoundWeb Community

Re: JTR Noesis 3TX FOH PA Speaker
« Reply #40 on: April 18, 2014, 08:18:54 AM »


Pages: 1 ... 3 4 [5]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.036 seconds with 21 queries.