Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Bryant Skillern]

I am in need of a volume pot for an Altec-Lansing 9444A power amp.
It is 2.5k log taper
The Altec Lansing part # is 47-06-124511
I can't seem to find it on the web.
I need to use this old amp for a small church plant we are starting in a very small town to get us started.
I can use just the one good side if I absolutley have to, would prefer to have both channels working in case I need to run a monitor with it.
If nothing else,  how could I set it at half volume using fixed resistors?

[PAULBORDON]

I am in need of a volume pot for an Altec-Lansing 9444A power amp.

When in doubt replace both channels with a generic 2.5 log taper

[ProSoundWeb Community]