I did have one more question I was hoping you guys could shine some light on for me.
Right when the first speaker went on stage I experienced some static on his mic that I am convinced came from an RF issue. I have heard this sound before when using WL mics.. Best way I can describe it is "static", similar to the sound you would get if you were using a transistor radio to cut through different stations.
I chopped the piece out of the recording so you guys could hear. http://www.kellent.biz/drops/static_recording.mp3
The sound in questions comes in right at the beginning, @ 13s, 23s, and 54s. It's best heard with a pair of cans on. In the room it wasn't loud, but enough for me to prep a backup lav in case it became worse. The lav was not rubbing against the speakers clothes...
the RF meters on the receiver were locked solid, so were all other 15 in use.. According to WL workbench all frequencies were spaced properly, etc. This particular mic was the only one that had this issue the entire time, luckily he only spoke for about 5-6 mins in the beginning.
Any ideas on what this could be??