ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: yorkville 1208 drivers and the b&c tbx100 whats the difference?  (Read 3192 times)

Steven warner

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 55
yorkville 1208 drivers and the b&c tbx100 whats the difference?
« on: November 13, 2012, 05:07:42 PM »

i have a set of 1208's that i rarely use anymore and I was thinking since they areent worth much i may use the drivers in this b&c design box since i could use a good set of singles http://www.bcspeakers.com/suggested.php?id=0000000008

I had in mind there was a thread about the tbx100 being very close on the old forums but I cant find it.   Thoughts?
Logged

Conrad Muzoora

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 267
  • Mbarara, Uganda. www.koolinvestments.co.ug
    • Kool Events Uganda
Re: yorkville 1208 drivers and the b&c tbx100 whats the difference?
« Reply #1 on: November 15, 2012, 07:03:45 AM »


Are you talking about the Yorkville LS1208? These are worth around 1000$ for a used pair. Guess that could buy you the right drivers that you require without gambling with the wrong drivers.
I have a pair of ls1208 myself and i think the woofers they load in there are Italian made possibly by RCF!

Conrad
www.kooleventug.com
Logged

Matt Vivlamore

  • Lab Lounge
  • Hero Member
  • *
  • Online Online
  • Posts: 591
  • Southern Maryland
    • https://www.facebook.com/MeerkatSound/
Re: yorkville 1208 drivers and the b&c tbx100 whats the difference?
« Reply #2 on: November 15, 2012, 10:56:33 AM »

A lot of Yorkville drivers are custom spec'd.  Sometimes they are built using a similar basket as the mass production units.
Logged
We're based in Southern Maryland, and LIKE us on Facebook: https://www.facebook.com/MeerkatSound/

Bill Hornibrook

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 415
Re: yorkville 1208 drivers and the b&c tbx100 whats the difference?
« Reply #3 on: November 15, 2012, 02:10:28 PM »

You might try contacting B&C about this:

 [email protected]

... and let us know if they answer you (and what that answer is) because I have a similar situation. I have a couple of B&C neo drivers taken from 808 cabs and sold to me for $150 apiece because the owner is convinced that neo is crap. I've got them in cabs untuned to the drivers at present that I use for non-critical gigs (sound OK) but would like to build these cabs for them too if it's a fit.

FWIW I built a couple of B&C cab designs for a pair of their 21s (21SW152s) and the results are awesome! These are very solid designs.

And very solid drivers.
Logged

ProSoundWeb Community

Re: yorkville 1208 drivers and the b&c tbx100 whats the difference?
« Reply #3 on: November 15, 2012, 02:10:28 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.042 seconds with 24 queries.