Hi,Racking up our Senn. G3 receivers into 4-way racks I'd like to connect the ethernet management ports into a 5-way hub (1 in, 4 out) for quick setup.. and ideally one with a built in wireless AP like the TP-Link TL-WR743 or similar.Should I be concerned about RF noise? .. is placing an ethernet switch or AP very close to a bunch of receivers likely to cause issues? 1 -has anyone had problems?2 - any recommended make / models - We use Apple Airport Express in back of our M7's & LS9's for the audio port.. but obviously need something with at least 5 ports for a 4-way Senn RX rack... would a metal-cased unit like the Netgear Pro range help reduce noise?3 - should i steer clear, use longer UTP cables and have a simple hub sat a few feet away?Thanks.gh
Here's pic 4 with AP off, g3 in 'next room' behind double-thick wallboard walls.
Why is there no mic transmitter on? The RF level of background noise is meaningless without a reference to what the mic transmitter is putting out. The "level" on the vertical axis does not represent normal RF type levels, which would have noise in the -100dB to -80dB range and mic transmitters in the -60dB to -20dB range. What does that scale represent?...
My 'interpretation' still remains pretty much the same, I want to keep the ew300 away from the Belkin N600.
In every case the mic is off scale. you need to set the vertical scale so the entire trace for the mic frequency is visible. There is still no way to see the difference between the mic level and the noise level. Mac
Page created in 0.173 seconds with 33 queries.