ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Dimmer problems  (Read 3684 times)

Rob Dellwood

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 55
Re: Dimmer problems
« Reply #10 on: January 13, 2012, 02:49:09 pm »

Here's the latest issue I'm having.

I have 4 Source 4's 575watt fixtures, one in each channel of a DMXD4. Chuavet Obey 40 controller. Cable run is about 50ft.

The problem I'm having is the fixture in channel 1 keeps coming on at about 30% out of no where. It will respond to pre set scenes and the channel fader from full on to off, but it comes back on a few seconds later. Will not respond to blackout.

I have an Obey 40, and I remember something similar happening to me with the light on Fixture 1.  If I remember right, I had to go in and completely reset the Obey 40 and delete everything to factory default status.  It almost seemed that it had some sort of demo program loaded into it that would turn on the first fixture.  I could be wrong on this, but it may be worth a try to solve your problem.  Let us know how it works out. 
Logged
Pages: 1 [2]  All   Go Up
 


Page created in 0.077 seconds with 21 queries.