ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Bracket to mount dimmer on vertical pole?  (Read 5713 times)

Mike Miller

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Bracket to mount dimmer on vertical pole?
« on: January 27, 2011, 09:30:20 am »

I have some Ultimate Support TS-99 stands, each with a pair of 2' horizontal members, each with a pair of source four pars mounted.  Currently, the dimmers are NSI DDS5600 with a C clamp.

My problem is that there not enough room in between the inner most par can and the stand to hang the dimmer pack.

So I'm looking for a bracket that would mount to the vertical pole of the stand (about 1.5" o.d.) and extend horizontally a few inches, from which I could mount the dimmer.  That would allow me to position the dimmer in the center, behind the cans, to allow free movement of the cans and still be close enough to be able to plug all the cans directly into the dimmer.

Any ideas?
Logged

Stuart Pendleton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 769
Re: Bracket to mount dimmer on vertical pole?
« Reply #1 on: January 27, 2011, 09:41:51 am »

Buy a 1.5" O clamp and attach the dimmer where the T bars come across so it can't slide down at all even if it loosens a bit.  I had the same issue with my T bars on top and used 2" O clamps to attach the box to the cross bar.  Works fine.
Logged
I am the luckiest man in the world because I'm married to the most wonderful woman in the world!!

This should have been my company's slogan:
"More bars in more places."  AT&T

Phil LaDue

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4039
Re: Bracket to mount dimmer on vertical pole?
« Reply #2 on: January 27, 2011, 06:07:48 pm »

Would something like this work?
http://www.thelightsource.com/products/41/view

Mike Miller

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Re: Bracket to mount dimmer on vertical pole?
« Reply #3 on: February 08, 2011, 10:47:13 am »

O clamps worked like a charm.  Thanks for idea Stuart!

Mike
Logged
Pages: [1]   Go Up
 

Page created in 0.021 seconds with 14 queries.