ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [All]   Go Down

Author Topic: Sub supression  (Read 6960 times)

Charles Wick

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Sub supression
« on: November 10, 2010, 11:02:05 PM »

We have recently put our subs on our stage at my church. The stage is about 24 inches off of a cement floor. I was wondering if there was something that we can put under the cabinets to dampen the sound/feeling from the subs to those who are on the stage? Thanks.
Logged

Paul O'Brien

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 778
Re: Sub supression
« Reply #1 on: November 11, 2010, 10:55:21 AM »

The solution is put the subs back on the floor where they belong.
Logged
Paul O

Silas Pradetto

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3047
Re: Sub supression
« Reply #2 on: November 11, 2010, 10:57:59 AM »

Generally, people put subs on the stage so they can feel them...not the other way around...

Also remember, if you have subs on either side of the stage, those that are approximately equidistant from the subs are going to get SLAMMED with the power alley, and that's not going to change no matter where the subs are (unless the equidistant factor changes).
Logged

Art Welter

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4874
Re: Sub supression
« Reply #3 on: November 11, 2010, 12:27:42 PM »

Charles Wick wrote on Wed, 10 November 2010 21:02

We have recently put our subs on our stage at my church. The stage is about 24 inches off of a cement floor. I was wondering if there was something that we can put under the cabinets to dampen the sound/feeling from the subs to those who are on the stage? Thanks.


Equarack Speaker Mounts would reduce the transmission of mechanical speaker vibration to the stage floor .
http://www.equarack.com/speaker-mounts.htm

There are other products that reduce mechanical coupling, these have the advantage of being weight adjustable.

However, it is likely that most of the vibration is caused acoustically, eliminating or reducing mechanical speaker vibration to the floor may only slightly reduce the problem.

Art Welter
Logged

Duane Massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2189
    • http://www.ozknozz.com
Re: Sub supression
« Reply #4 on: November 11, 2010, 05:45:47 PM »

+1 to Art's post
Logged
Duane Massey
Houston, Texas, USA

Charles Wick

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: Sub supression
« Reply #5 on: November 11, 2010, 07:02:27 PM »

Thank You Mr. Art for the reply. That is what I was wanting.

When we had the subs on the floor, it sounded horrible and it flooded the first few rows of the floor with low end. We tried to change the settings, but it was still bad. Now they are on the stage, the room is more balanced with the highs and the lows, thus sounding better. But the worship team isn't used to the low end so much on the stage.

Or current set up is having 7 DB Tech DVA T-4's in the sky and 2 Renkus-Heinz PN212 subs on the floor, with about 30-35 feet between them.
Logged

Josh Billings

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 949
    • http://www.mindboxmedia.com/soundsystem
Re: Sub supression
« Reply #6 on: November 12, 2010, 05:18:48 PM »

Wouldn't just normal floor spikes work? Would probably damage the floor a bit, but should do a good job.

-Josh
Logged

Art Welter

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4874
Re: Sub supression
« Reply #7 on: November 12, 2010, 08:53:09 PM »

Josh Billings wrote on Fri, 12 November 2010 15:18

Wouldn't just normal floor spikes work? Would probably damage the floor a bit, but should do a good job.

-Josh

Don't know what you mean by "normal" floor spikes, but a spike will transmit mechanical energy just fine.
Put a nail between your teeth and put the pointy end on a loud sub cabinet if you doubt that fact.

Spikes do tend to prevent movement of a cabinet.
Logged

Tim McCulloch

  • Newbie
  • *
  • Offline Offline
  • Posts: 0
Re: Sub supression
« Reply #8 on: November 25, 2010, 10:24:46 PM »

Air space.  Say, 18-24 feet of it.
Logged
"Will you stand by me against the cold night, or are you afraid of the ice?" Crack The Sky

drewgandy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
    • http://gandymethod.com
Re: Sub supression
« Reply #9 on: November 28, 2010, 04:40:06 PM »

Art Welter wrote on Fri, 12 November 2010 19:53


Put a nail between your teeth and put the pointy end on a loud sub cabinet if you doubt that fact.



I just can't help but think that you suggest this from experience.  

Care to tell us about it?

drew
Logged

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9010
Re: Sub supression
« Reply #10 on: November 28, 2010, 04:53:31 PM »

Tim McCulloch wrote on Thu, 25 November 2010 22:24

Air space.  Say, 18-24 feet of it.

As the general rule to prevent sound transmission is as follows:
MASS-airspace-MASS (the 2 mass walls are not attached to each other), and airtight.

Anything else is a start to a compromise.
Logged
For every complicated question-there is a simple- easy to understand WRONG answer.

Can I have some more talent in the monitors--PLEASE?

Ivan Beaver
dB Audio & Video Inc.
Danley Sound Labs

Tim Padrick

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5008
Re: Sub supression
« Reply #11 on: December 04, 2010, 10:38:10 PM »

I think what the spikes do is minimize movement between the cab and the floor - the cab is no longer pounding on the floor.

Cab on floor - especially if there is carpet: Note the amount of energy you feel in the room and the amount you feel in your feet from the floor.  Now spike the cabinet - you feel more in the room and less through your feet from the floor (yes, I've done this).

Pages: 1 2 [All]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.026 seconds with 17 queries.