ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All   Go Down

Author Topic: Labsub build pics  (Read 15999 times)

Joe Breher

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 255
    • http://q-music.com
Re: Labsub build pics
« Reply #10 on: October 04, 2010, 09:11:21 PM »

This are some of the cleanest looking built LABs I've seen.

The idea has taken hold... I've gone from idle speculation, to wondering if I could really devote myself to the project of building a half dozen or so LABs.

To that end -- did you follow the prints http://www.prosoundweb.com/article/lsp_documentation_page_dr awings_photos_specs_and_more/here on the site (other than the access hole)? Or was a fair amount of tweaking dimensions required before committing to cutting?
Logged
Joe Breher
Liberty in my Lifetime!

http://q-music.com

Lasse Lukkari

  • Newbie
  • *
  • Offline Offline
  • Posts: 30
Re: Labsub build pics
« Reply #11 on: October 30, 2010, 01:09:02 PM »

Joe Breher wrote on Tue, 05 October 2010 02:11


To that end -- did you follow the prints    http://www.prosoundweb.com/article/lsp_documentation_page_dr awings_photos_specs_and_more/here on the site (other than the access hole)? Or was a fair amount of tweaking dimensions required before committing to cutting?


Sorry for the delayed reply. My plans are almost the same as the original ones. Although I have converted them for 18mm ply. I found the 18mm plans on the documentation page completely unusable. I also don't use the any bent curved parts or Sonotube.

The access panels are like that because I want to have all the t-nuts to be replaceable. If you follow the original plans you will end up with t-nuts that are partly inside panel joints. It's also nice to have little more space while bolting the drivers.

I can share my .dxf files if someone wants them. They should be pretty much cnc ready for 2440 x 1220 (8 x 4) ply.

The handles and Speakon panels I use are these:
  http://www.adamhall.com/en/Large_heavy_duty_steel_bar_handle _-_black.html
  http://www.adamhall.com/en/Dish_2x_uni._XLR_or_4_pole_speako n.html
Logged

bharat bhushan

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
Re: Labsub build pics
« Reply #12 on: November 05, 2010, 12:12:27 AM »

nice built
keep it up
Logged

Oskar Rei

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Re: Labsub build pics
« Reply #13 on: December 10, 2010, 03:31:25 PM »

Logged

Duane Silveira

  • Newbie
  • *
  • Offline Offline
  • Posts: 38
Re: Labsub build pics
« Reply #14 on: December 10, 2010, 09:02:11 PM »

Just build three more and you will be laughing! Very Happy
Logged

Oskar Rei

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Re: Labsub build pics
« Reply #15 on: December 11, 2010, 08:42:31 AM »

I'll be laughing only with one of these on full throttle indoors. Laughing

But maybe someday..
Logged
Pages: 1 [2]  All   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.048 seconds with 17 queries.